Omron SYSDRIVE 3G3MV User Manual page 323

List of Parameters
Note Available for 5.5kW and 7.5kW Inverters only.
19 Emergency The Inverter stops
according to the setting
stop fault
in n005 for interruption
(NO)
mode selection with
the emergency stop
input turned ON. input turned ON.
20 Emergency
NO: Emergency stop
stop alarm
with the contact
(NO)
closed.
NC: Emergency stop
with the contact with the contact
21 Emergency
opened.
stop fault
Fault: Fault output is
(NC)
ON and reset with
RESET input. Alarm
output is ON (no reset output is ON (no reset
required). required).
22 Emergency
stop alarm
"STP" is displayed (lit
(NC)
with fault input ON and
flashes with alarm
input ON)
23 PID control ON: PID control dis-
cancel abled.
24 PID control ON: Integral value
integral reset.
reset
25 PID control ON: Keeps integral
integral value on hold.
hold
26 Inverter ON: Displays inverter
(see overheating overheating warning
note) warning (oH3)
34 Up or down Up or down command
command (set in n56 only)
By setting n56 to 34,
the set value in n55 is
ignored and the follow-
ing setting are forcibly
made.
S6: Up command
S7: Down command
35 Self-diag- ON: RS-422/485 com-
nostic test munications self-diag-
nostic test (set in n056
only)
Chapter 10
10-13