Omron SYSDRIVE 3G3MV User Manual page 139

Basic Operation
Use "during RUN" (set value: 1) or "zero speed" (set value: 3) for the timing for
Note 1.
stopping the motor using a brake. To specify a precise stop timing, set "frequen-
cy detection 1" (set value: 4) or "frequency detection 2" (set value: 5), and set
the frequency detection level (n095).
Set values 20 (frequency reference loss) and 21 (Inverter overheating warning
Note 2.
oH3) are available for 5.5- and 7.5-kW Inverters only.
5-40
Chapter 5