Parameter Copy And Verify Function; Parameter For Copying And Verifying Set Values - Omron SYSDRIVE 3G3MV SERIES User Manual

Preparing for Operation and Monitoring
3-2

Parameter Copy and Verify Function

The Digital Operator of the 3G3MV Inverter has an EEPROM in which the set values in
all the parameters and data on the capacity and software version of the Inverter can be
stored.
By using the EEPROM, most parameter set values in the Inverter can be copied to
another Inverter.
Note In the above case, however, the Inverters must have the same power supply spec-
ification and control mode (i.e., V/f or vector control mode). Some types of param-
eter set values cannot be copied.

3-2-1 Parameter for Copying and Verifying Set Values

• Use the following parameter to read, copy, and verify the set values.
Parame- Register
ter
n176 01B0 Parame-
ter copy
and
verify
function
selection
3-10
Name Description
The following items are
selectable.
rdy: Ready to accept the
next command
rEd: Reads the parameter
CPy: Copies the parameter
vFy: Verifies the parameter
vA: Displays the capacity of
the Inverter
Sno: Displays the software
version.
Setting Unit of Default
range setting setting
rdy to --- rdy
Sno
Chapter 3
Chan-
ges dur-
ing
opera-
tion
No