Omron SYSDRIVE 3G3MV User Manual page 221

Communications
Register No.
(Hex)
0039 PID input
003A PID output
003B to 003C Not used
003D Communications error
003E to 00FF Not used
The fault status 2, warning status, Inverter status 2, and accumulated operating time
Note
functions are provided for 5.5kW and 7.5kW Inverters only.
D Status Signal (Register 0020 Hex)
Bit No.
0
1
2
3
4
5
6
7
8 to 15
D Fault Status 1 (Register 0021 Hex)
Bit No.
0 OC
1 OV
2 OL2
3 OH
4 Not used
5 Not used
6 FBL
7 EFj, STP
Note When a fault results, the corresponding bit will be set to 1.
Function
During RUN (1: During RUN)
Forward/reverse operation (1: Reverse operation)
Inverter ready (1: Ready)
Fault (1: Fault)
Data setting error (1: Error)
Multi-function output 1 (1: ON)
Multi-function output 2 (1: ON)
Multi-function output 3 (1: ON)
Not used
Function
Description
Read based on ±1% as ±10 and a value
equivalent to the maximum frequency as
100%.
Read based on ±1% as ±10 and a value
equivalent to the maximum frequency as
100%.
---
Refer to the following corresponding table.
---
Function
Bit No.
8
Fj
9 OL1
10 OL3
11 Not used
12 UV1
13 UV2
14 CE
15 OPR
Chapter 7
Function
7-27