Omron SYSDRIVE 3G3MV User Manual page 325

List of Parameters
Para Reg- Name
me- ister
ter No.
No.
n060 013C Frequency
reference
gain
n061 013D Frequency
reference
bias
n062 013E Analog fre-
quency ref-
erence fil-
ter time
n063 --- Not used
Note Frequency reference loss (setting value: 20) and inverter overheating warning (setting value: 21)
can be set for 5.5-kW and 7.5-kW Inverters only.
Description
13 Inverter ON: Inverter ready to
ready operate (with no fault
detected)
14 Fault retry ON: Fault retry
15 UV in prog- ON: Undervoltage
ress being monitored
16 Rotating in ON: Rotating in
reverse reverse direction
direction
17 Speed ON: Speed search in
search in progress
progress
18 Commu- ON: Turns communica-
nications tions output 1 ON.
output
19 PID feed- ON: PID feedback loss
back loss enabled.
20 Frequency ON: Frequency refer-
(see reference ence lost (when fre-
note) loss quency reference loss
detection in n064 is en-
abled, and either ana-
log input or pulse train
input is set for frequen-
cy reference selection
in n004)
21 Inverter ON: Inverter overheat-
(see overheating ing warning (ON when
note) warning the multi-function input
oH3 Inverter overheating
warning signal is being
input, i.e., when 0H3 is
flashing.)
Used to the input characteristics of analog fre-
quency references.
Gain: The frequency of maximum analog input
(10 V or 20 mA) in percentage based on the (10 V or 20 mA) in percentage based on the
maximum frequency as 100%. maximum frequency as 100%.
Bias: The frequency of minimum analog input (0
V or 0 or 4 mA) in percentage based on the
maximum frequency as 100%.
Used to set the digital filter with a first-order lag
for analog frequency references to be input.
---
Chapter 10
Set- Unit Defaul
t set-
ting of ges dur-
ting
range set-
ting
0 to 1% 100 Yes
255
--100 1% 0 Yes
to 100
0.00 0.01 s 0.10 No
to
2.00
--- --- --- ---
Chan- Ref-
er-
ing ence
opera- page
tion
5-14
5-14
5-15
---
10-15