Conforming To Ec Directives - Omron SYSDRIVE 3G3MV User Manual

Design
H Conforming to EC Directives
D Wiring the Power Supply
Make sure that the Inverter and Noise Filter are grounded together.
·Always connect the power input terminals (R/L1, S/L2, and T/L3) and power supply via
a dedicated Noise Filter.
·Reduce the length of the ground wire as much as possible.
·Locate the Noise Filter as close as possible to the Inverter. Make sure that the cable
length between the Noise Filter and the Inverter does not exceed 40 cm.
·The following Noise Filters are available (all footprint type).
3-phase 200-VAC Noise Filter
Inverter
Model 3G3MV-
A2001/A2002/A2004/A2007
A2015/A2022
A2040
A2055/A2075
Single-phase 200-VAC Noise Filter
Inverter
Model 3G3MV-
AB001/AB002/AB004
AB007/AB015
AB022
AB040
3-phase 400-VAC Noise Filter
Inverter
Model 3G3MV-
A4002/A4004
A4007/A4015/A4022
A4030/A4040
A4055/A4075
3-phase 200-VAC Noise Filter
Model 3G3MV-
PFI2010-E
PFI2020-E
PFI2030-E
PFI2050--E
Single-phase 200-VAC Noise Filter
Model 3G3MV-
PFI1010-E
PFI1020-E
PFI1030-E
PFI1040-E
3-phase 400-VAC Noise Filter
Model 3G3MV-
PFI3005-E
PFI3010-E
PFI3020-E
PFI3030--E
Chapter 2
Rated current (A)
10
16 to 20
26 to 30
50
Rated current (A)
10
20
30
40
Rated current (A)
5
10
15 to 20
30
2-43