Omron SYSDRIVE 3G3MV User Manual page 81

Preparing for Operation and Monitoring
H Setting n001 for Parameter Write-prohibit Selection/Parameter
Initialization
·No data can be written to n176 for parameter copy function selection unless the default
setting is changed. To write data to this parameter, set n001 for parameter write-pro-
hibit selection/parameter initialization to 4.
Parame- Register
ter
n001 0101
Name Description
Parame- Used to prohibit parameters
ter write- to be written, sets parame-
prohibit ters, or change the monitor
selection/ range of parameters.
parame-
Used to initialize parameters
ter initial-
to default settings.
ization
0: Sets or monitor parameter
n001. The parameters within
a range from n002 to n179
can be monitored only.
1: Sets or monitor the param-
eters within a range from
n001 to n49 (i.e., function
group 1 settings).
2: Sets or monitor the param-
eters within a range from
n001 to n79 (i.e., function
groups 1 and 2 settings).
3: Sets or monitor the param-
eters within a range from
n001 to n119 (i.e., function
groups 1 through 3 settings).
4: Sets or monitor the param-
eters within a range from
n001 to n179 (i.e., function
groups 1 through 4 settings).
5: Same operation as set to
4, but RUN command is ex-
cepted in program mode.
6: Clears the error log.
8: Initializes parameters to
default settings in 2-wire
sequence.
9: Initializes parameters in
3-wire sequence.
10:For the USA, initializes
parameter in 2--wire se-
quence.
11:For the USA, initializes
parameter in 3--wire se-
quence.
Setting Unit of
range setting
0 to 9 1 1
Chapter 3
Default Chan-
setting ges dur-
ing
opera-
tion
No
3-13