Omron SYSDRIVE 3G3MV User Manual page 330

List of Parameters
Para Reg- Name
me- ister
ter No.
No.
n098 0162 Overtorque
detection
level
n099 0163 Overtorque
detection
time
n100 0164 UP/DOWN
frequency
selection
n101 0165 Speed
search de-
celeration
time
n102 0166 Speed
search op-
eration lev-
el
n103 0167 Torque
compensa-
tion gain
n104 0168 Torque
compensa-
tion pri-
mary delay
time con-
stant
n105 0169 Torque
compensa-
tion core
loss
n106 016A Rated
motor slip
n107 016B Motor
phase to
neutral
resistance
10-20
Description
Used to set overtorque detection level.
Detection from output torque: Set in percent-
age based on the rated motor torque as 100%.
Detection from output current: Set in percent-
age based on the rated Inverter output current
as 100%.
Used to set the detection time of overtorque.
Used to store the adjusted frequency reference
with the UP/DOWN function.
0: Frequency not stored
1: Frequency stored
The frequency must be on hold for 5 s or
more.
Note Only applicable for 200/400V,
5.5/7.5kW models
Note Applicable for
No. 010024 or later
Note Only applicable for 200/400V,
5.5/7.5kW models
Note Applicable for
No. 010024 or later
Used to set the gain of the torque compensa-
tion function.
Note The default setting does not need any
changes in normal operation.
Set the response speed of the torque com-
pensation function.
Note Normally, the default setting does not
need to be changed.
Set the core loss of the motor in use.
Note Normally, the default setting does not
need to be changed.
Note This parameter is enabled in V/f control
mode only.
Used to set the rated slip value of the motor in
use.
Note Used as the constant of the slip com-
pensation function.
Set this parameter to 1/2 of the phase to neu-
tral resistance or phase-to-phase resistance of
the motor.
Note This parameter is used as a vector con-
trol constant.
Set-
ting
range
30 to
200
0.1 to
10.0
0, 1
0.0 to
10.0
software version
0 to
200
software version
0.0 to
2.5
0.0 to
25.5
0.0 to
6,550
0.0 to
20.0
0.000
to
65.50
Chapter 10
Unit Defaul Chan-
t set-
of ges dur-
ting
set- ing
ting opera-
tion
1% 160 No
0.1 s 0.1 No
1 0 No
0.1s 2.0 No
1% 150 No
0.1 1.0 Yes
0.1 s 0.3 No
0.1 W Varies No
with
the
capac-
ity.
0.1 Varies Yes
Hz with
the
capac-
ity.
0.001 Varies No
with
W
the
capac-
ity
Ref-
er-
ence
page
6-36
6-36
6-48
---
---
6-37
6-37
6-38
6-39
5-6
6-2