Omron SYSDRIVE 3G3MV User Manual page 107

Basic Operation
Maximum Voltage (VMAX)
n012
Setting 0.1 to 255.0 [0.1 to 510.0] (V)
range
n013 Maximum Voltage Frequency
(FA)
Setting 0.2 to 400.0 (Hz)
range
n014 Middle Output Frequency (FB)
Setting 0.1 to 399.9 (Hz)
range
Middle Output Frequency
n015
Voltage (VC)
Setting 0.1 to 255.0 [0.1 to 510.0] (V)
range
n016 Minimum Output Frequency
(FMIN)
Setting 0.1 to 10.0 (Hz)
range
Minimum Output Frequency
n017
Voltage (VMIN)
Setting 0.1 to 50.0 [0.1 to 100.0] (V)
range
Note 1. [ ] values indicate those for 400-V-class Inverters.
Note 2. For 5.5- and 7.5-kW Inverters, this value is set to 10.0 V for 200-V-class models
and to 20.0 V for 400-V-class models.
Output
voltage (V)
n012 (VMAX)
n015 (VC)
n017 (VMIN)
n016
(FMIN)
5-8
Register 010C
Unit of
setting
Register 010D
Unit of
setting
Register 010E
Unit of
setting
Register 010F
Unit of
setting
Register 0110
Unit of
setting
Register 0111
Unit of
setting
n014 n013
(FB) (FA)
Changes during
Hex operation
0.1 V Default setting
Changes during
Hex operation
0.1 Default setting
Hz
Changes during
Hex operation
0.1 Default setting
Hz
Changes during
Hex operation
0.1 V Default setting
Changes during
Hex operation
0.1 Default setting
Hz
Changes during
Hex operation
0.1 V Default setting
Note 1. Set the parameters so that
the following condition will be
satisfied.
n016
Note 2. The value set in n015 will be
ignored if parameters n016
and n014 are the same in
value.
Frequency (Hz)
n011
(FMAX)
Chapter 5
No
200.0
[400.0]
No
60.0
No
1.5
No
12.0
[24.0]
(seenote2)
No
1.5
No
12.0
[24.0]
(seenote2)
n014 < n013 n011