Omron SYSDRIVE 3G3MV User Manual page 315

List of Parameters
Param- Regis- Name
eter ter No.
No.
n010 010A Operation
selection at
Digital Opera-
tor interrup-
tion
n011 010B Maximum fre-
quency
(FMAX)
n012 010C Maximum
voltage
(VMAX)
n013 010D Maximum
voltage fre-
quency (FA)
n014 010E Middle output
frequency
(FB)
n015 010F Middle output
frequency
voltage (VC)
n016 0110 Minimum out-
put frequency
(FMIN)
n017 0111 Minimum out-
put frequency
voltage
(VMIN)
n018 0112 Acceleration/
Deceleration
time setting
(n018)
Note 1. The values in brackets are those for 400-V-class Inverters.
Note 2. The values in brackets are those for 400-V-class Inverters.
Description
Select whether or not to detect the
OPR error (Digital Operator connec-
tion error).
0: No (The Inverter continues operat-
ing.)
1: Yes
(Error output turns ON and the
Inverter coasts to a stop)
Used to set the V/f pattern as the
basic characteristic of the Inverter.
V/f control mode: set output voltage
per frequency
Vector control mode: set for torque
adjustment
Output
voltage
n012
n015 n015
n017
n016 n016 n014 n014 n013 n013
Note Set the parameters so that the
following condition will be satis- following condition will be satis-
fied.
n016 n014 < n013
Note The value set in n015 will be Note The value set in n015 will be
ignored if parameters n016 and ignored if parameters n016 and
n014 have the same value.
Select the acceleration or decelera-
tion time of the Inverter.
0: 0.1 s
(Less than 1,000 s: 0.1-s incre-
ments; 1,000 s or over: 1-s incre-
ments)
1: 0.01 s
(Less than 100 s: 0.01-s incre-
ments; 100 s or over: 0.1-s incre-
ments)
Set- Unit
ting of
range set-
ting
0, 1 1
50.0 to 0.1
400.0 Hz
0.1 to 0.1 V
255.0
(0.1 to
510.0)
0.2 to 0.1
400.0 Hz
Fre-
quency quency
n011 n011
(Hz) (Hz)
0.1 to 0.1
399.9 Hz
0.1 to 0.1 V
255.0
n011
(0.1 to
510.0)
0.1 to 0.1
10.0 Hz
0.1 to 0.1 V
50.0
(0.1 to
100.0)
0, 1 1
Chapter 10
Default Changes Ref-
setting
during er-
opera- ence
tion page
0 No 6-41
60.0 No 5-7
200.0 No 5-7
(400.0)
(see
note 1)
60.0 No 5-7
1.5 No 5-7
12.0 No 5-7
(24.0)
(see
note 2)
1.5 No 5-7
12.0 No 5-7
(24.0)
(see
note 2)
0 No 5-27
10-5