Omron SYSDRIVE 3G3MV User Manual page 123

Basic Operation
·When the frequency reference is changed while the FREF indicator is lit, the corre-
sponding parameter is changed simultaneously. For example, if frequency reference 2
has been selected with multi-function input (a multi-step speed reference), the set
value in n025 (for frequency reference 2) will be changed simultaneously when the fre-
quency reference is changed while the FREF indicator is lit.
·Take the following default steps, for example, to change the frequency reference with
the FREF indicator lit.
Key Indicator
sequence
D Setting the Key Sequential Frequency (n009)
·The Enter Key need not be pressed when changing the setting in n009. In that case,
the frequency reference will change when the set value is changed with the Increment
or Decrement Key while the data display is continuously lit.
Key Sequential Frequency
n009
Setting
Setting 0, 1
range
Set Values
Value
0 Enter Key enabled (The set value is entered with the Enter Key pressed.)
1 Enter Key disabled (The set value set is entered immediately.)
5-24
Display
example
Power On
Note If the FREF indicator has not been lit, press the
Mode Key repeatedly until the FREF indicator
is lit.
Use the Increment or Decrement Key to set the
frequency reference.
The data display will flash while the frequency
reference is set.
Press the Enter Key so that the set value will be
entered and the data display will be lit.
Regis-
ter
Unit of
setting
Explanation
0109 Changes during
Hex operation
1 Default setting
Description
Chapter 5
No
0