Omron SYSDRIVE 3G3MV User Manual page 90

Test Run
WARNING
!
WARNING
!
WARNING
!
WARNING
!
WARNING
!
WARNING
!
WARNING
!
WARNING
!
Caution
!
Caution
!
4-2
Turn ON the input power supply only after mounting the front cover,
terminal covers, bottom cover, Operator, and optional items. Not
doing so may result in electrical shock.
Do not remove the front cover, terminal covers, bottom cover,
Operator, or optional items while the power is being supplied. Not
doing so may result in electrical shock.
Do not operate the Operator or switches with wet hands. Doing so
may result in electrical shock.
Do not touch the inside of the Inverter. Doing so may result in
electrical shock.
Do not come close to the machine when using the error retry function
because the machine may abruptly start when stopped by an alarm.
Doing so may result in injury.
Do not come close to the machine immediately after resetting
momentary power interruption to avoid an unexpected restart (if
operation is set to be continued in the processing selection function
after momentary power interruption is reset). Doing so may result in
injury.
Provide a separate emergency stop switch because the STOP Key
on the Operator is valid only when function settings are performed.
Not doing so may result in injury.
Be sure confirm that the RUN signal is turned OFF before turning ON
the power supply, resetting the alarm, or switching the
LOCAL/REMOTE selector. Doing so while the RUN signal is turned
ON may result in injury.
Be sure to confirm permissible ranges of motors and machines
before operation because the Inverter speed can be easily changed
from low to high. Not doing so may result in damage to the product.
Provide a separate holding brake when necessary. Not doing so
may result in injury.
Chapter 4