Omron SYSDRIVE 3G3MV User Manual page 316

List of Parameters
Param- Regis- Name
eter ter No.
No.
n019 0113 Acceleration
time 1
n020 0114 Deceleration
time 1
n021 0115 Acceleration
time 2
n022 0116 Deceleration
time 2
n023 0117 S-shape
acceleration/
deceleration
characteristic
10-6
Description
Acceleration time: The time required
to go from 0% to 100% of the maxi-
mum frequency.
Deceleration time: The time required Deceleration time: The time required
to go from 100% to 0% of the maxi-
mum frequency.
Note Note The actual acceleration or The actual acceleration or
deceleration time is obtained
from the following formula.
Acceleration/Deceleration
time = (Acceleration/Decel- time = (Acceleration/Decel-
eration time set value) ´ (Fre-
quency reference value) ¸
(Max. frequency)
Used to set S-shape acceleration/de-
celeration characteristics.
0: No S-shape acceleration/decelera-
tion (trapezoidal acceleration/de-
celeration)
1: S-shape acceleration/deceleration
characteristic time 0.2 s
2: S-shape acceleration/deceleration
characteristic time 0.5 s
3: S-shape acceleration/deceleration
characteristic time 1.0 s
Note When the S-shape accelera-
tion/deceleration characteristic
time is set, the acceleration and
deceleration times
lengthened according to the
S-shape at the beginning and
end of acceleration/decelera-
tion.
Set- Unit
ting of
range set-
ting
0.0 to 0.1 s
(chan
6,000
ge in
n018) n018)
0 to 3 1
will be
Chapter 10
Changes Ref-
Default
setting
during er-
opera- ence
tion page
10.0 Yes 5-27
10.0 Yes 5-27
10.0 Yes 5-27
10.0 Yes 5-27
0 No 5-28