Omron SYSDRIVE 3G3MV User Manual page 320

List of Parameters
Param- Regis- Name
eter ter No.
No.
n041 0129 Acceleration
time 3
n042 012A Deceleration
time 3
n043 012B Acceleration
time 4
n044 012C Deceleration
time 4 time 4
n045 --- Not used
to
n049
10-10
Description
4 acceleration/deceleration times can
be set if Multi-func. Inputs (two from
n050 to n056) are set to "11" (Accel/
decel time select 1) and to "27" (Ac-
cel/decel time select 2).
The following table shows which ac-
celeration and decelaration times are
selected by each possible combina- selected by each possible combina-
tion of Accel/decel time select 1 and tion of Accel/decel time select 1 and
2. The accel. and decel. times can be
changed while the inverter is operat-
ing.
Accel/decel Accel/decel Acceleration
time time time
select 1 select 2
OFF or not OFF or not Accelera-
set set tion time 1
n019
ON OFF or not Accelera-
set tion time 2
n021
OFF or not ON Accelera-
set tion time 3
n041
ON ON Accelera-
tion time 4
n043
Note Applicable for software version
No. 010024 or later
---
Set- Unit
ting of
range set-
ting
0.00 to De-
6000 pend
sec on
n018
setting
0.00 to De-
6000 pend
sec on
n018 n018
Deceleration
setting
time
0.00 to De-
Decelera-
tion time 1
6000 pend
n020
sec sec on on
Decelera-
n018
tion time 2
setting
n022
0.00 to De-
Decelera-
tion time 3
6000 6000 pend pend
n042
sec sec on on
Decelera-
n018
tion time 4
n044
setting setting
--- ---
Chapter 10
Default Changes Ref-
setting
during er-
opera- ence
tion page
10.0
sec
10.0
sec
10.0
sec
10.0
sec sec
--- --- ---