Canon iR C3200 Series Service Manual page 88

Chapter 2
8) For both front and rear, secure the joint grounding
spring [2] using the screw [1] removed from the
small cover (for the front, tighten over the plate);
then, secure the joint plate (front/rear) [4] using the
2 included screws [3] (1 each at front and rear).
F-2-32
(front)
F-2-33
(rear)
9) Where the upper right cover (small) has been
removed, fit the positioning pin [A] for the bottom
of the reader connection unit [1].
F-2-34
2-12
10) Secure the reader connection unit [1] using the 2
included screws [2].
F-2-35
11) Then, use the included 2 screws [1] to further
secure it in place.
F-2-36
12) Shift down the arm [1] of the reader connection
unit by 90 deg C; then, hook it on the protrusion [2]
sticking out of the machine.
F-2-37