Connecting The Power Cables; Points To Note Before Starting The Work - Canon iR C3200 Series Service Manual

Chapter 2

2.1.4 Connecting the Power Cables

When connecting accessories to the machine, be sure to connect the power cables as indicated:
When connecting the pedestal, paper deck, finisher, ADF, anti-condensation heater, and PS print server unit.
PS Print Server
2-Cassette Pedestal-X1

2.1.5 Points to Note Before Starting the Work

Keep the following in mind when installing the machine:
1. If the machine is brought from a cold to warm place, condensation can occur in its optical system, laser unit, or
pickup/feeder unit, leading to image faults. If such is the case, leave the machine alone without unpacking for 1 hr
or more before starting the work.
The term condensation refers to the phenomenon that occurs on a metal surface when it is brought from a cold to
warm location as the result of rapidly cooled vapor. It is seen as droplets of water on the metal surface.
2. The machine weighs about 120 kg (including the reader unit). Be sure to work in a group of 4.
2-6
DADF-K1
Unit-C1
Outlet1
Outlet2
Outlet3 Inlet
included with machine)
Inlet
included with anti-condensation heater)
Inlet
included with
PS Print Server Unit-C1)
included with pedestal)
F-2-9
0006-4602
0000-4364