2.11.2 Installation Procedure
Before starting the work, be sure to perform the follwing:
1. Turn off the control panel power switch.
2. Turn off the main power switch.
3. Disconnect the power cable (for wall outlet).
1) Remove the copyboard cover. (If an ADF is used, you need not remove it.)
2) Release the 2 cable clamps [1] to free the reader power cable.
[1] OFF
[2] OFF
F-2-126
F-2-127
[3] Pull out.
[1]
Chapter 2
0000-8557
2-49