Checking The Images/Operations - Canon iR C3200 Series Service Manual

2.5 Checking the Images/Operations

2.5.1 Checking the Images/Operations

Be sure to put back the service book cover; turning on the machine's main power without doing so will cause a fault
associated with error code E020. (The protrusion [A] of the service book cover will push the segment identified as
[B] in the figure when the front cover is closed, thus opening/closing the shutter assembly of the pattern reader unit.)
Place a test sheet on the copyboard glass, and select the cassette 1/2 as the source of paper; then, make copies, and
check the images.
(If a 2-cassette pedestal is used, try cassette 3/4 to check images.)
- Check to be sure there is no abnormal noise.
- Check to be sure that the images are free of faults at all default reproduction ratios.
- Check to make sure that as many copies as are specified are made without a problem.
- Check to make sure that the margin (L2) to the front of the copies made with each of the cassettes as the source of
paper is 2.0 ±1.5 mm; otherwise, make the following adjustments:
1) Slide out the manual feed unit and the cassette 1/2; then, open the pickup vertical path cover.
(In the case of a 2-cassette pedestal, cassette 3/4.)
2) Remove the 2 screws [1], and detach the right front cover [2].
(Do the same also for a 2-cassette pedestal.)
F-2-79
Chapter 2
0000-4379
2-25