Making Pre-Checks; Selecting The Site - Canon iR C3200 Series Service Manual

2.1 Making Pre-Checks

2.1.1 Selecting the Site

Select the site of installation while keeping the following in mind; if possible, visit the user's premises before the
delivery of the machine:
1. The place must provide a source of power that is as rated (±10%) and that may be used exclusively by the machine;
it also must provide a terminal for grounding.
2. The place must fall within the following ranges of temperature and humidity. The site must not be near a water
faucet, water boiler, humidifier, or refrigerator.
3. The site must not be near a source of fire or subject to dust or ammonium gas. If exposed to direct rays of the sun,
provide curtains.
4. The amount of ozone generated by the machine in operation is not of a level that would harm the health of
individuals around it. Some, however, may find its order unpleasant, requiring good ventilation for the work
place.
5. Be sure that the machine's feet will remain in contact with the floor and the machine will remain level.
6. Be sure that the machine will be at least 10 cm from all walls and there will be ample space for using the machine.
Humidity (%RH)
80
75
60
40
25
20
10
0 10
(32) (50)
15 20
(59) (68)
Temperature
F-2-1
°C
27.5 30
(81.5)(86) (°F)
Chapter 2
0000-4363
2-1