Canon iR C3200 Series Service Manual page 96

Chapter 2
6) Turn the open/close lever [2] of the cartridge cover
[1] clockwise by 90° to open the cartridge cover.
F-2-74
7) Match the groove [1] found behind the machine's
cartridge cover and the protrusion [2] found on the
bottom of the protective cover; then, secure them in
place.
F-2-75
8)
1. Push the drum cartridge in the direction of the arrow
[1] indicated on its top edge.
2. Store away the protective cover after fitting the
drum cartridge.
While supporting the protective cover [2] with you
hand, push in the cartridge (Y) [3], thereby setting
it in place (Y, M, C, and Bk starting from left).
2-20
F-2-76
9)
When pulling out the sealing tape, be sure to hold the
drum cartridge with your hand so that the cartridge
will not slip off.
Pull out the sealing tape [1].
F-2-77
10) Fit the M, C, and Bk drum cartridges in the same
way.
11) Close the cartridge cover, and turn the open/close
lever clockwise to set it in place.
12) Shift the intermediate transfer unit releasing lever
back to its initial position.
13) Close the front cover.