3.5 MEMORY (SDRAM DIMM)
[B]
[A]
!
CAUTION
Before installing this option, do the following:
1. Print out all data in the printer buffer.
2. Turn off the main switch and disconnect the power cord, the telephone
line, and the network cable.
1. When installing this option and the printer controller (G306) at the same time,
first remove the printer controller [A] from the expansion box [B]. Then go to
step 4.
2. Remove the cover [C] (1 screw).
3. Remove the printer controller [D] (2 screws).
4. Attach the printer memory [E] to the printer controller, as shown.
5. Re-install the printer controller.
6. Turn on the machine and print the Printer Configuration Page ([User Tools] –
[Printer] – [List Print]). Verify that the total memory has increased.
SM
CÓPIA NÃO CONTROLADA
G688I501.WMF
3-11
CÓPIA NÃO CONTROLADA
INSTALLATION PROCEDURES
G688I500.WMF
[E]
G688I178.WMF
[C]
[D]
A265/A267