Detailed Section Descriptions - Gestetner A265 Service Manual

2. DETAILED SECTION DESCRIPTIONS

2.1 AUTOMATIC SERVICE CALLS
2.1.1 SERVICE CALL CONDITIONS
The fax unit makes an automatic service call when the base copier's BiCU
generates any SC code except for those stored in the following RAM.
NOTE: The service station's fax number has to be programmed in advance, or the
machine cannot make a service call.
Exceptions
Address (H)
680DC8 1st SC code - High byte (BCD)
680DC9 1st SC code - Low byte (BCD)
680DCA 2nd SC code - High byte (BCD)
680DCB 2nd SC code - Low byte (BCD)
680DCC 3rd SC code - High byte (BCD)
680DCD 3rd SC code - Low byte (BCD)
680DCE 4th SC code - High byte (BCD)
to
680DEF 20th SC code - Low byte (BCD)
To add additional SC codes, program them in the blank addresses.
Wild Cards
This function allows "A" or "a", to be used as a wild card instead of numbers from 0
to 9. For example, "1AA" or "1aa" means all the SC codes from 100 to 199, and
"39A" or "39a" means all the SC codes from 390 to 399.
The fax unit cannot make an automatic service call when a Fax SC code condition
has occurred. Refer to the Troubleshooting section for Fax SC code details.
Manual Service Call
If the service station needs a report, the user can make a service call manually, by
changing bit 7 of User Parameter 14 (0E) to "1".
SM
CÓPIA NÃO CONTROLADA
Definition
to
2-1
CÓPIA NÃO CONTROLADA
AUTOMATIC SERVICE CALLS
Default SC code
01
Automatic SBU adjustment
92
error
09
Program loading error
80
09
Program version error
99
Not Programmed
FF(H)
192
980
999
A265/A256