Gestetner A265 Service Manual page 593

[A]
6. Attach the G3 unit [A] to the machine (6 screws, 1 connector).
7. Connect cable [B] to the interface board and attach bracket [C] (1 screw). Then
attach the NCU [D] (removed from the NCU unit in step 3) to the G3 unit (4
screws).
8. Connect cable [E] to the NCU [D], then clamp cable [E] as shown.
SM
CÓPIA NÃO CONTROLADA
A895I354.WMF
[C]
3-9
CÓPIA NÃO CONTROLADA
OPTIONAL UNITS
[D]
[B]
A895I392.WMF
[E]
A265/A267