Relay Clutches - Gestetner A265 Service Manual

6.6.6 RELAY CLUTCHES

1. Remove the optional duplex unit and/or by-pass tray unit if they have been
installed.
2. Remove the rear cover and lower rear cover. (See Paper Tray Lift Motors.)
3. Remove the lower right cover [A] (2 screws).
4. Remove the scanner right cover. (See Scanner Exterior.)
5. Remove the right cover [B] (4 screws).
6. Swing down the I/O board bracket. (See Paper Feed Clutches.)
7. Remove the connector bracket [C] (2 screws).
8. Replace the upper relay clutch [D] (1 connector).
9. Remove the right back cover [E] (1 screw).
10. Replace the lower relay clutch [F] (1 connector).
SM
CÓPIA NÃO CONTROLADA
[B]
[A]
A267R716.WMF
[E]
6-27
CÓPIA NÃO CONTROLADA
[D]
A267R717.WMF
[F]
A267R714.WMF
PAPER FEED
[C]
A265/A267