Sg3-V34 (Function 17) - Gestetner A265 Service Manual

SERVICE LEVEL FUNCTIONS

4.1.28 SG3-V34 (FUNCTION 17)

NOTE: An optional G3 interface is required to access function 17.
1. SG3 Bit Switches
Please refer to section 4.1.2 for how to adjust bit switch settings.
1. Enter the fax service mode.
2. Press ) ..
3. Press ).
4. Adjust the required bit switches.
5. Exit the service mode.
2. SG3 Memory Dump
1. Enter the fax service mode.
2. Press ) . then '.
3. Enter the first fax digits of the start and
end addresses, then press "OK".
4. Press /.
5. Exit the service mode.
A265/A267
CÓPIA NÃO CONTROLADA
4-14
CÓPIA NÃO CONTROLADA
A895M548.BMP
A895M549.BMP
A895M550.BMP
SM