Bit Switches; G4 Internal Switches - Gestetner A265 Service Manual

BIT SWITCHES

2.2 BIT SWITCHES
&
WARNING
Do not adjust a bit switch or use a setting that is described as "Not used",
as this may cause the machine to malfunction or to operate in a manner
that is not accepted by local regulations. Such bits are for use only in other
areas, such as Japan.
NOTE: After changing any of the switches below, turn off the machine, wait for 5
seconds or more, and turn it back on, so that the new settings take effect.

2.2.1 G4 INTERNAL SWITCHES

Bit Switch 00
No. FUNCTION
0
Country code
to
7
Bit 4 3 2 1 0 Country
0 0 0 0 0 France
0 0 0 0 1 Germany (1TR6 mode)
0 0 0 1 0 Universal (Europe Euro ISDN)
1 0 0 0 1 USA
Note: In Germany, use the UK setting for the Euro ISDN lines.
Bit switches 01 and 02 are not used.
Bit Switch 03
No. FUNCTION
0
Amount of protocol dump
data in one protocol dump
list
0: Last communication only
1: Up to the limit of the
memory area for protocol
dumping
1-7
Not used
A256/A257
CÓPIA NÃO CONTROLADA
Change this bit to 0 if you want to have a protocol
dump list of the last communication only.
This bit is only effective for the dump list #2 (D +
Bch1).
Do not change the factory settings.
2-2
CÓPIA NÃO CONTROLADA
COMMENTS
COMMENTS
SM