Gestetner A265 Service Manual page 816

FIRMWARE UPDATE
5. Check the firmware version as follows:
1) Controller and NIB Firmware
• CARD: Firmware version on the card
• ROM: Current controller or NIB firmware version
2) PS3 DIMM
• DIMM: Current PS3 firmware version
• CARD: Firmware version on the card
6. Start downloading the new firmware.
1) Controller and NIB Firmware
• Press [Execute] to download the new firmware.
• Press [Cancel] to exit.
2) PS3 DIMM
• Press [Execute] to download.
• Turn off the machine to cancel.
7. After the firmware download has finished, turn off the machine, and remove the
card. Then, re-install the cover [A].
8. Turn on the machine, and print the service summary report to confirm that the
new firmware version has been installed.
Error Messages
Message
Erasing Failed ADRS:
xxxxxx
Writing Failed ADRS:
xxxxxx
Memory Insufficient
Melting Failed
DIMM – installable
program cannot find
CRC error: Please
retry install
NIB board is not
equipped
Initialization failed
Download mode is
disabled
A265/A267
CÓPIA NÃO CONTROLADA
Description
Test the on-board flash ROM and
retry the download.
Reset the controller and try again.
The firmware file used to program
the card may be damaged. Get a
new firmware file and store it on
the card.
Wrong type of firmware on the
card.
The firmware file used to program
the card may be damaged. Get a
new firmware file and store it on
the card.
Install a NIB on the controller, then
try again.
Retry the download.
Retry the download.
4-10
CÓPIA NÃO CONTROLADA
Controller NIB
Yes Yes
Yes Yes
Yes Yes
Yes Yes
No No
No No
No Yes
No Yes
No Yes
PS3
Yes
Yes
Yes
No
Yes
Yes
No
No
No
SM