Gestetner A265 Service Manual page 522

[C]
[A]
4. Remove the plate [A] from the expansion box (2 screws).
5. Install the scanner controller board [B] in the right-most slot of the expansion
box [C] (2 screws).
6. Cut away the cover [D] from the application cover [E].
7. Reinstall the application cover (1 screw).
8. Remove the mode key cap. Then install the key tops [F] and decal [G]
depending on the machine configuration, as shown.
SM
CÓPIA NÃO CONTROLADA
[E]
[D]
[B]
A844I504.WMF
[G]
[F]
18-7
CÓPIA NÃO CONTROLADA
SCANNER FUNCTIONS
A844I503.WMF
A265/A267