Gestetner A265 Service Manual page 246

SERVICE PROGRAM MODE
Mode No.
Class Class
1 and 2 3
SC History Clear
7-902
Copy Jam History
Display
7-903*
Copy Jam History
Clear
7-904
Orig. Jam History
7-905
Display
Orig. Jam History
Clear
7-906
Timer Counter Reset
7-907
PCU Counter
7-908* Display
PCU Counter Reset
7-909
Jam Code Display
7-910
A265/A267
CÓPIA NÃO CONTROLADA
Resets the SC history.
After selecting "1", press down the "Photo"
key and the "OK" or ( key at the same time
to reset the counters. If the reset was
successful, the beeper will sound 5 times. If
it failed, the beeper will sound only twice.
Displays the copy jams that have occurred.
Refer to Section 4.2.6.
Resets the copy jam history.
After selecting "1", press down the "Photo"
key and the "OK" or ( key at the same time
to reset the counters. If the reset was
successful, the beeper will sound 5 times. If
it failed, the beeper will sound only twice.
Displays the original jams that have
occurred. Refer to section 4.2.8.
Resets the original jam history.
After selecting "1", press down the "Photo"
key and the "OK" or ( key at the same time
to reset the counters. If the reset was
successful, the beeper will sound 5 times. If
it failed, the beeper will sound only twice.
Resets the timer counter (SP7-991).
After selecting "1", press down the "Photo"
key and the "OK" or ( key at the same time
to reset the counters. If the reset was
successful, the beeper will sound 5 times. If
it failed, the beeper will sound only twice.
Displays the value of the PCU counter
(number of copies since the last PCU
change).
Resets the PCU counter.
After selecting "1", press down the "Photo"
key and the "OK" or ( key at the same time
to reset the counters. If the reset was
successful, the beeper will sound 5 times. If
it failed, the beeper will sound only twice
Displays the jam codes.
The order of the jam display is as follows.
• Newest paper jam code
• Newest original jam code
• Paper jam codes (in numerical order)
• Original jam codes (in numerical order)
4-58
CÓPIA NÃO CONTROLADA
Function
Settings
0: No
1: Yes
0: No
1: Yes
0: No
1: Yes
0: No
1: Yes
0: No
1: Yes
0: No
1: Yes
0: No
1: Yes
SM