Setting Up The Nib For Various Networks; Netware Networks - Gestetner A265 Service Manual

SETTING UP THE NIB FOR VARIOUS NETWORKS

2.3 SETTING UP THE NIB FOR VARIOUS NETWORKS
This section gives a summary of how to set up the NIB in various network
environments.
NOTE: It is not recommended for service technicians to program network and
protocol parameters. Ask the customer's network administrator to program
and manage these parameters.

2.3.1 NETWARE NETWORKS

The following parameters are required for NetWare networks.
Parameter
Protocol
(Default = Enabled)
Operation Mode
(Default = Print Server)
Remote Printer No.
(Default = 0)
Print Server Name
Print Server Password
File Server Name
NDS Context Name
Preferred NDS Tree
Print Queue Scan Rate
Frame Type
(Default = Auto-Select)
Job Timeout
(Default = 15 s)
Disable Bindery
NOTE: 1) 'Remote printer number' is necessary only when the "Operation Mode"
is "Remote Printer".
2) 'Print server name' is necessary only when the "Operation Mode" is
"Print Server". The default name is "RNPxxxxxx" (xxxxxx is the lower 6
digits of the MAC address).
3) The preferred NDS context must be typed in without a starting dot ( . ).
– OU=Development.O=Corp [OK]
– .OU=Development.O=Corp [NG]
– Development.Corp [OK]
– .Development.Corp [NG]
4) The following utilities can be used to change the settings.
– Printer Manager for Admin
– Web Status Monitor
– (Telnet)
A265/A267
CÓPIA NÃO CONTROLADA
Novell 2.x/3.x/4.x/ (5.0)
Bindery Network
Yes
Yes
(Print Server
or Remote Printer)
Yes (Note 1)
Yes (Note 2)
Cannot be programmed
Yes
No
No
Cannot be programmed
Yes
Yes
Cannot be programmed
2-2
CÓPIA NÃO CONTROLADA
Novell 4.x / (5.0)
NDS Network
Yes
Yes
(Print Server
or Remote Printer)
Yes (Note 1)
Yes (Note 2)
Cannot be programmed
No
Yes
Yes (Note 3)
Cannot be programmed
Yes
Yes
Cannot be programmed
SM