Scanner Wires - Gestetner A265 Service Manual

6.1.7 SCANNER WIRES

[A]
1. Remove the exposure glass, operation panel, and all scanner exterior covers.
(See Exposure Glass and Scanner Exterior/Operation Panel.)
2. Remove the left upper stay. (See Exposure Lamp.)
3. Remove the front frame. (See Exposure Lamp.)
4. Remove the rear bracket. (See Exposure Lamp.)
5. Remove the rear frame. (See Exposure Lamp.)
6. Remove the lens cover. (See Lens Block Assembly.)
7. Remove the lens block assembly. (See Lens Block Assembly.)
8. Remove the front and rear scanner wire pins [A]. Then, remove the 1st
scanner.
SM
CÓPIA NÃO CONTROLADA
6-7
CÓPIA NÃO CONTROLADA
SCANNER UNIT
A267R012.WMF
A265/A267