Toner Density; Adjust The Toner Density Control; If The Toner Density Is Too Low; If The Toner Density Is Too High - Gestetner A265 Service Manual

TONER DENSITY

7.4 TONER DENSITY

7.4.1 ADJUST THE TONER DENSITY CONTROL

If the toner density is too low

Change the value of SP 2-201-2 to "1" or "3".

If the toner density is too high

Change the value of SP2-201-2 to "2" or "4".

7.4.2 DIRTY BACKGROUND

Do either of the following.
• Change the value of SP2-929-1 from 2.80 V to 3.10 V.
• Change the value of SP2-201-1 to a value between – 550V and -500V
A265/A267
CÓPIA NÃO CONTROLADA
7-18
CÓPIA NÃO CONTROLADA
SM