Gestetner A265 Service Manual page 826

FIRMWARE HISTORY
B306 PRINTER OPTION FIRMWARE MODIFICATION HISTORY
DESCRIPTION OF MODIFICATION
•
Electrical sort mode (collation) will be
disabled when special paper mode is
selected for tray 2.
•
If the bridge unit cover is opened during
printing in electrical sort mode (second
set onward), the machine cannot recover
from the resulting jam condition.
•
Even when the PJLK command
"<Esc>&11H" is released instructing the
machine to feed the paper from tray 2,
the paper is not fed from the tray.
•
In addition to the cumulative total counter
value (copier/fax/printer), the total
counter values for each function can be
sent to PCs connected to the PAS
Server.
•
With Overlay printing, the text outside the
fixed overlay pattern is printed out as
PCL commands (specifically, the ESC
sequence).
⇒
•
If a tray SC occurs during an electrical
sort (collation) printing, the error
message does not display on LCD.
•
NIB NVRAM back and restore function
(SP mode: Service Tools "L: NIB
read/write") is no longer valid.
NOTE: Please refer to TSB B306 - 006 for
details.
⇒
•
The printed area is shifted slightly when
"Unit of Measure" is defined using the
macro command.
•
With Raster images, sometimes part of
the right edge of the printable area
comes out blank.
•
Italian and Spanish text characters
overlap each other on the configuration
page error log.
•
The following title on the configuration
page has been changed: "Printer Name
(NetWare)"
•
If the optional memory and PS option are
not installed, A3-size images read by a
scanner cannot be printed out.
A265/A267
CÓPIA NÃO CONTROLADA
"Printer Name".
CÓPIA NÃO CONTROLADA
FIRMWARE
LEVEL NUMBER
B3065280 C
March 2000
Production
B3065280 D April 2000
Production
B3065280 E Sept. 2000
Production
6-6
Rev. 10/2000
SERIAL FIRMWARE
VERSION
1.3.4
1.3.6
1.4.0
SM