V.34 Modem Test (Function); Dtmf Test (Function 11) - Gestetner A265 Service Manual

SERVICE LEVEL FUNCTIONS
4.1.19 V.34 MODEM TEST (FUNCTION 11)
1. Enter the service mode.
2. Press ) ) then ).
3. Press +.
4. Select a symbol rate and a data rate, then
press OK.
) – Select a symbol rate
' – Select a data rate
5. Press / to start the test.
To stop the test, press &.
6. Exit the service mode.

4.1.20 DTMF TEST (FUNCTION 11)

1. Enter the fax service mode.
2. Press ) ).
3. Press one of the following numbers:
)"– DTMF test (analog line)
*"– DTMF test (ISDN line)
NOTE: A G4 interface is required to test
DTMF tones on an ISDN line.
4. Press '.
5. Choose a DTMF signal type at the
keypad, then press /.
To stop the test, press &.
A265/A267
CÓPIA NÃO CONTROLADA
4-10
CÓPIA NÃO CONTROLADA
A895M526.BMP
A895M527.BMP
A895M528.BMP
A895M523.BMP
A895M524.BMP
A895M529.BMP
SM