Gestetner A265 Service Manual page 565

- Reduction Rate Equalization On (Example Diagram: Two-page Printout) -
1. The machine determines how many pages will be needed to print the message,
taking the following into account:
The final page (n) is such that the received image length is within (paper length x n)
+ 20 mm
The data must be reduced to fit on pages of length (paper length - 4 mm), with an
equal reduction rate for each page.
The last 10 mm of the previous page will be repeated at the top of the next page
(this length can be adjusted or repetition can be disabled).
2. The machine prints all the pages, at the same reduction rate.
If the customer does not want to receive a fax message on separate pages, page
separation can be disabled. However, once it has been disabled, the machine does
not print the received fax message until a paper size which can hold the received
fax image on one page is set in a cassette. Keep page separation enabled if the
customer expects to receive fax messages longer than the installed paper.
Cross Reference
Parameter
Reduction in sub-scan direction
on/off
Equalizing reduction rate among
separated pages
Page separation threshold when
reduction is disabled
Page separation threshold when
reduction is enabled
Page separation on/off
Page separation mark on/off
Image duplication with page
separation, on/off
Length of the repeated image on
the next page
SM
CÓPIA NÃO CONTROLADA
Switch
Printer Switch 03, bit 0
Printer Switch 0E, bit 7
Printer Switch 03, bits 4-7
Printer Switch 04, bits 0-4
Printer Switch 0E, bit 2
Printer Switch 00, bit 0
Printer Switch 00, bit 1
Printer Switch 04, bits 5-6
2-11
CÓPIA NÃO CONTROLADA
PRINTING FEATURES
A895D528.WMF
Default Setting
Enabled
(except Germany)
Enabled
6 mm
20 mm
Enabled
Enabled
Enabled
10 mm
A265/A256