Ncu Parameters (Function 06); Ram Dump (Function 06) - Gestetner A265 Service Manual

4.1.12 NCU PARAMETERS (FUNCTION 06)

1. Enter the fax service mode.
2. Press ( -.
3. Press '.
4. Move the cursor to the target parameter
using the arrow keys, then enter a new
value at the ten-key pad.
5. Exit the service mode.

4.1.13 RAM DUMP (FUNCTION 06)

1. Enter the fax service mode.
2. Press ( -.
3. Press one of the following numbers as
required:
* – G3 memory dump list
+ – G4 memory dump list
NOTE: An optional G4 interface is required
to print the G4 memory dump list.
4. Enter the first four digits of the start and end
addresses, then press "OK"
Example: Start at 680000, end at 6801FF
- 0 ( ( - 0 ( ) "OK"
5. Press /.
6. Exit the service mode.
SM
CÓPIA NÃO CONTROLADA
4-7
CÓPIA NÃO CONTROLADA
SERVICE LEVEL FUNCTIONS
A895M515.BMP
A895M518.BMP
A895M515.BMP
A895M517.BMP
A265/A267