Gestetner A265 Service Manual page 630

BIT SWITCHES
System Switch 16
No FUNCTION
0 Parallel Broadcasting
0: Disabled
1: Enabled
1 Changing the G3 line default.
0: PSTN-1
1: PSTN-2
1-7 Not used
System Switch 17 - Not used (do not change the settings)
System Switch 18 - Not used (do not change the settings)
System Switch 19
No FUNCTION
0 Key acknowledgement tone
to volume adjustment
2 000 (Min.: OFF)-111 (Max.)
Default setting – 011
3-6 Not used
7 Special Original mode
0: Disabled
1: Enabled
System Switch 1A - Not used (do not change the settings)
System Switch 1B - Not used (do not change the settings)
A265/A267
CÓPIA NÃO CONTROLADA
1: When the G4 or/and G3 unit is installed, the
machine sends messages simultaneously using
both available ports (PSTN/ISDN) during
broadcasting.
This function allows the user to select the default
G3 line type. An optional SG3 unit is required to
use the PSTN-2 setting.
Do not change the settings.
This controls the volume of this tone when the
machine is in fax mode (it has no effect on the tone
when the machine is in copier or printer mode).
Do not change the settings.
1: If the customer frequently wishes to transmit a
form or letterhead which has a colored or printed
background, change this bit to "1". "Special
Original" can be selected in addition to the "Text",
"Text/Photo" and "Photo" modes.
When this mode is selected, the "Text/Photo" and
"Photo" LEDs are both lit.
Cross reference
Type of special original mode – Scanner switch
q
00 bit 0.
4-26
CÓPIA NÃO CONTROLADA
COMMENTS
COMMENTS
SM