Gestetner A265 Service Manual page 647

Communication Switch 02
No FUNCTION
2 Treatment of pages received
with errors during G3
reception
0: Deleted from memory
without printing
1: Printed
3 Hang-up decision when a
negative code (RTN or PIN) is
received during G3 immediate
transmission
0: No hang-up, 1: Hang-up
4-6 Not used
7
Method of total error rate
calculation
0: Normal method
1: French PTT requirement
Communication Switch 03
No FUNCTION
0
Maximum number of page
to retransmissions in a G3
7
memory transmission
Communication Switch 04 - Not used (do not change the settings)
Communication Switch 05 - Not used (do not change the settings)
SM
CÓPIA NÃO CONTROLADA
0: Pages received with errors are not printed.
0: The next page will be sent even if RTN or PIN
is received.
1: The machine will send DCN and hang up if it
receives RTN or PIN.
This bit is ignored for memory transmissions or if
ECM is being used.
Do not change the settings.
0: Error rate is calculated by dividing the number
of total lines by the number of error lines.
1: Error rate is calculated by dividing the number
of total plus error lines by the number of error
lines.
00 - FF (Hex) times.
This setting is not used if ECM is switched on.
Default setting - 03(H)
4-43
CÓPIA NÃO CONTROLADA
BIT SWITCHES
COMMENTS
COMMENTS
A265/A267