Gestetner A265 Service Manual page 213

Mode No.
Class Class
1 and 2 3
Erase Margin
(Leading Edge)
1
Erase Margin
2 (Trailing Edge)
4-012*
Erase Margin
3 (Left Side)
Erase Margin
4 (Right Side)
Scanner Free Run
4-013
White Plate
Scanning
(Start Position)
1
4-015*
White Plate
Scanning
(Scanning Area)
2
Sub Scan
Magnification
(Scanner)
4-101*
APS Data Display
4-301
APS Small Size
Original
4-303*
SM
CÓPIA NÃO CONTROLADA
Adjusts the erase margin at each side for
scanning.
Do not adjust this unless the user wishes to
have a scanner margin that is greater than
the printer margin.
Performs a scanner free run with the
exposure lamp on.
After selecting "1", press "OK" or the ( key
twice to start this feature. Press the &
(Clear/Stop) key to stop.
Adjusts the scanning start position on the
white plate for auto shading.
The default is 6 mm from the leading edge.
The setting specifies how far scanning starts
from the default position.
Adjusts the width of the area on the white
plate (in the sub scan direction) that is
scanned for auto shading.
The default is 5 mm. The current setting
specifies the difference from this default.
Adjusts the magnification in the sub scan
direction for scanning. If this value is
changed, the scanner motor speed is
changed.
Use the ! key to toggle between + and -
before entering the value. The specification
is ± 0.5%. See "Replacement and
Adjustment - Copy Adjustment" for details,
Section 6.8.
Displays the status of the APS sensors and
platen/DF cover sensor.
See "APS and Platen/ADF Cover Sensor
Output Display" after the SP mode table,
Section 4.2.12.
Selects whether the copier determines that
the original is A5 size when the APS sensor
cannot detect the size.
If "A5 lengthwise" is selected, paper sizes
that cannot be detected by the APS sensors
are regarded as A5 lengthwise. If "Not
detected" is selected, "Cannot detect
original size" will be displayed.
4-25
CÓPIA NÃO CONTROLADA
SERVICE PROGRAM MODE
Function Settings
0 ~ 9.0
0.1 mm/step
1.0 mm
0 ~ 9.0
0.1 mm/step
1.0 mm
0 ~ 9.0
0.1 mm/step
1.0 mm
0 ~ 9.0
0.1 mm/step
1.0 mm
0: No
1: Yes
– 3.0 ~ + 6.0
0.1 mm/step
0.0 mm
– 3.0 ~ + 6.0
0.1 mm/step
0.0 mm
– 0.9 ~ + 0.9
0.1%/step
0.0%
0: No
(Not
detected)
1: Yes
(A5
lengthwise)
A265/A267