B306 Firmware Modification History - Gestetner A265 Service Manual

Rev. 05/2000
6.4 FIRMWARE HISTORY

6.4.1 B306 FIRMWARE MODIFICATION HISTORY

B306 PRINTER OPTION FIRMWARE MODIFICATION HISTORY
DESCRIPTION OF MODIFICATION
•
First Mass Production
•
Firmware modified so that it can be used
with printer controllers for China and
Taiwan.
•
Firmware modified so that it will be
compatible with new HDD to be used in
the printer controller.
•
NOTE: new HDD is identical in function to
previous one.
•
If a Postscript Driver job is canceled
midway through, the image data for the
next job is not printed out correctly.
•
"Waiting..." is displayed when an error
occurs, but the machine does not return to
normal operating mode (ready status).
The next job is not printed out.
•
When two separate jobs of text data less
than 256 bytes is sent from the network,
the two jobs are printed out
simultaneously on the same page.
•
It is possible to print out the HDD
Directory List when there is no HDD or PS
option installed.
•
Corrects Taiwanese translation error.
•
If data recovery (Raster image production)
takes longer than usual when using
Formfeed, the Alarm LED remains lit until
printing begins. To correct this, the LED
can now be turned off by pressing the
ENTER key.
SM
CÓPIA NÃO CONTROLADA
FIRMWARE
LEVEL
B3065280 A
B3065280 B
6-5
CÓPIA NÃO CONTROLADA
FIRMWARE HISTORY
SERIAL FIRMWARE
NUMBER VERSION
1st Mass 1.2.0
Production
January 1.2.9
Production 2000
A265/A267