Gestetner A265 Service Manual page 670

BIT SWITCHES
SG3 Switch 0B
No FUNCTION
0 Protocol requirements:
Europe
0: Disabled 1: Enabled
1 Protocol requirements: Spain
0: Disabled 1: Enabled
2 Protocol requirements:
Germany
0: Disabled 1: Enabled
3 Protocol requirements: France
0: Disabled 1: Enabled
4 PTT requirements: Germany
0: Disabled 1: Enabled
5 PTT requirements: France
0: Disabled 1: Enabled
6
Not used
7 Not used
SG3 Switch 0C
No FUNCTION
0 Pulse dialing method
1 Bit 1 Bit 0 Setting
0 0
0 1
1 0
1 1
2-7 Not used
SG3 Switch 0D - Not used (do not change the settings)
SG3 Switch 0E - Not used (do not change the settings)
SG3 Switch 0F - Not used (do not change the settings)
A265/A267
CÓPIA NÃO CONTROLADA
The machine does not automatically reset these
bits for each country after a country code (System
Switch 0F) is programmed.
Change the required bits manually at installation.
Do not change the setting.
Do not change the setting.
P = Number of pulses sent out, N = Number
dialed.
Normal(P=N)
Oslo (P=10 - N)
Sweden
(N+1)
Not used
Do not change the settings.
CÓPIA NÃO CONTROLADA
COMMENTS
COMMENTS
4-66 SM