3. REPLACEMENT AND ADJUSTMENT
NOTE: When taking apart the bridge unit, first take the unit out of the copier.
3.1 BRIDGE UNIT DRIVE MOTOR REPLACEMENT
1. Remove the bridge unit from the copier. (See the Installation Procedure in the
base copier manual.)
2. Remove the rear cover [C] (2 screws).
3. Remove the bridge unit drive motor [D] (2 screws, 1 connector).
SM
CÓPIA NÃO CONTROLADA
BRIDGE UNIT DRIVE MOTOR REPLACEMENT
15-7
CÓPIA NÃO CONTROLADA
[D]
[C]
A897R103.WMF
A265/A267