Memory All Clear: Sp5-801 - Gestetner B003 Service Manual

Rev. 09/2002

5.1.8 MEMORY ALL CLEAR: SP5-801

Executing Memory All Clear resets all the settings stored in the NVRAM to their
default settings except the following:
SP7-003-1: Electrical total counter value
SP5-811-1: Machine serial number
SP5-907: Plug & Play Brand Name and Production Name Setting
1. Execute SP5-990 to print out all SMC Data Lists.
2. Open SP mode 5-801.
3. Press the number for the item that you want to initialize. The number you select
determines which application is initialized. For example, press 1 if you want to
initialize all modules or select the appropriate number from the table below.
No. What It Initializes
1 All modules
2 Engine
3 SCS (System Control
Service)/SRM
⇒
5 MCS (Memory Control
Service)
6 Copier application
7 Fax application
8 Printer application
9 Scanner application
10 Network application
11 NCS (Network Control
Service)
12 R-FAX
4. Press Execute, and then follow the prompts on the display to complete the
procedure.
5. Make sure that you perform the following settings:
• Do the laser beam pitch adjustment (SP2-109).
• Do the printer and scanner registration and magnification adjustments
( 3.21 Replacement and Adjustment, "Copy Adjustments").
• Do the touch screen calibration (
"touch screen calibration").
SM
Comments
Initializes items 2 ~ 12 below.
Initializes all registration settings for the engine and
processing settings.
Initializes default system settings, CSS settings,
operation display coordinates, and ROM update
information.
Initializes the automatic delete time setting for
stored documents.
Initializes all copier application settings.
Initializes the fax reset time, job login ID, all TX/RX
settings, local storage file numbers, and off-hook
timer.
Initializes the printer defaults, programs registered,
the printer SP Bit SW, and printer CSS counter.
Initializes the scanner defaults for the scanner and
all the Scanner SP modes.
Deletes the NFA management files and thumbnails,
and initializes the JOB login ID.
Initializes the system defaults and interface settings
(IP addresses also), the SmartNetMonitor for
Admin, WebStatusMonitor settings, and the
TELNET settings.
Initializes the Job login ID, SmartNetMonitor for
Admin, Job History, and local storage file numbers.
3.21.4 Replacement and Adjustment,
5-61
SERVICE PROGRAM MODE
B003/B004/B006/B007