Service Level Programming - Gestetner A265 Service Manual

Item
Polling ID
Confidential ID
Memory Lock ID
RTI (PSTN1/PSTN2)
TTI (PSTN1/PSTN2)
* MSN = Multiple Subscriber Number; this is also referred to as "Direct Dialing In"
in some countries. In this service, more than one number is allocated to one line
(one line can have up to 8 units connected to it).

1.3 SERVICE LEVEL PROGRAMMING

Item
System switches
Communication switches
G4 internal switches
G4 parameter switches
After changing any setting, make sure to turn off the machine, wait for 5 or more
seconds, then turn it back on, so that the new settings take effect.
SM
CÓPIA NÃO CONTROLADA
ISDN PSTN
G4 G3 G3
Function No.
System Switch 0A
01 - 1
- Network used for G3 transmission
- Network used for G4-to-G3 fallback
01 - 4 Communication Switch 07
- G4-to-G3 fallback On/Off
- Reflect line type for G4-to-G3 fallback
01 - 6 Change the country code, and reset the
machine first. Then change any of the locally
01 - 7
required settings and/or the following.
Internal Switches 17, 18, 1A, 1B and 1C
- G4 to G3 automatic fallback parameters
Parameter Switch 01, bits 4 to 6
- Codec attenuation level
1-5
CÓPIA NÃO CONTROLADA
SERVICE LEVEL PROGRAMMING
Remarks
Used for secured polling, transfer
request operations, and closed
network.
Used for confidential reception.
Optional SAF memory required.
Used to identify the terminal in G3
NSF/NSS communications.
Printed on each transmitted page in
G3 communications.
Remarks
A265/A267