User Level Programming - Gestetner A265 Service Manual

USER LEVEL PROGRAMMING

1.2 USER LEVEL PROGRAMMING
The following items can be programmed by the key operator. Make sure that the
items are programmed correctly.
Item
Transfer report:
G3 direct number
Transfer report:
G4 fax number
G3-1 analog line:
CSI
G3-2 analog line:
CSI
G3 digital line:
Own fax number1
G3 digital line:
Own fax number2
G3 digital line:
Sub-address
G3 digital line:
CSI
G4 digital line:
Own fax number1
G4 digital line:
Own fax number2
G4 digital line:
Sub-address
G4 digital line:
TID (Terminal ID)
A265/A267
CÓPIA NÃO CONTROLADA
ISDN PSTN
G4 G3 G3
!
! !
!
!
!
!
!
!
!
!
!
1-4
CÓPIA NÃO CONTROLADA
Remarks
Used for transfer request operations in
G3 PSTN communications
Used for transfer request operations in
ISDN communications
Used to identify the terminal in G3
DIS/DCS communications over the
PSTN1.
Used to identify the terminal in G3
DIS/DCS communications over the
PSTN2.
When not using MSN* service:
Program the ISDN subscriber number
here. If an another terminal is on the
same bus from the DSU, identify the
terminals using a sub-address.
When using MSN* service:
Program the dedicated ISDN number
for the terminal as the 1st ISDN
subscriber number. If the customer
wishes the machine to answer calls to
two different numbers, program the
second number as the 2nd subscriber
no.
Program a sub-address to identify the
terminal, if two or more terminals
answer the call to the same subscriber
number for G3 fax.
Used to identify the terminal in G3
communications over an ISDN.
When not using MSN* service:
Program the ISDN subscriber number
here. If an another terminal is on the
same bus from the DSU, identify the
terminals using a sub-address.
When using MSN* service:
Program the dedicated ISDN number
for the terminal as the 1st ISDN
subscriber number. If the customer
wishes the machine to answer the
calls to two different numbers,
program the second number as the
2nd subscriber no.
Program a sub-address to identify the
terminal, if two or more terminals
answer the call to the same subscriber
number for G4 fax.
Used to identify the terminal in G4
communications.
SM