Gestetner A265 Service Manual page 274

FIRMWARE MODIFICATION HISTORY
Description of Modification
⇒
Corrects the following:
Occasionally, the full page image data is reduced
and printed on the left side, and the right side is
printed solid black in Fax and Printer modes when
the following 3 conditions exist:
1. SP2-998 (Main Scan Magnification) –1 (Engine)
has a different value than –2 (Copy).
2. The interleave function is enabled between copy
and printer modes (both 600 dpi).
3. Soon after the interleave job is finished, the
machine prints out an image at a resolution
other than 600 dpi (e.g. fax image, printer
image at 300dpi).
•
When the main power is turned on, the machine
cannot detect jammed paper remaining at the
exit sensor if the interchange unit is not
installed.
•
A new SP mode (SP2-993) has been added to
prevent dirty background on the rear side of the
first copy. Please refer to TB# A265/A267-020 for
more details.
A265/A267
CÓPIA NÃO CONTROLADA
A265/A267 Firmware Modification History (BICU)
CÓPIA NÃO CONTROLADA
Firmware
Level
A2675532 G
4-86
Rev. 06/2001
Serial Firmware
Number Version
Feb 2001 1.87
Production.
SM