Image Processing Modes
The user can select text, text/photo, and photo original types, as usual. However,
each of these original types has a range of different choices (such as "sharp text",
"glossy photo", etc). these are listed in the table on the following page.
• Notice that there is a "Service Mode" for each of the text, text/photo, and
photo original modes. This is a customizable mode, with a range of SP
modes that can be adjusted to meet user requirements that are not covered
by the other original modes.
In addition, there are two main image processing modes: grayscale processing
mode (called "Enhanced Mode" on the display) and binary picture processing mode
(called "Normal Mode" on the display). Either of these can be selected for each
original type.
The user can select the modes that best suit their original with the following user
tools:
• Greyscale/Binary Picture: UT mode - 2. Copier – 1. General Features – 08.
Image Mode Select
• Original Type: UT mode - 2. Copier – 1. General Features – 09. Image Mode
Adjustment (select text, text/photo, or photo at the operation panel, then
select the sub-type with this UT mode)
For details of the SP modes that can be used to adjust the image quality for all the
original modes, see the "SP Modes for Each Image Processing Step" section.
SM
CÓPIA NÃO CONTROLADA
2-9
CÓPIA NÃO CONTROLADA
IMAGE PROCESSING
A265/A267