3.11 PICK-UP/PAPER FEED/REVERSE ROLLERS
1. Remove the paper tray unit (see Paper Tray Unit Replacement).
2. Remove the snap ring (1 each for the paper feed and reverse rollers).
3. Remove the pick up roller [A].
4. Replace each roller [B], [C].
NOTE: Install the paper feed rollers the correct way round, as shown in the
illustration. If the rollers are installed incorrectly, this will cause the one-way
clutch to lock.
SM
CÓPIA NÃO CONTROLADA
PICK-UP/PAPER FEED/REVERSE ROLLERS
[A]
10-19
CÓPIA NÃO CONTROLADA
A862R115.WMF
[B]
[C]
A265/A267