Ncu - Gestetner A265 Service Manual

6.3 NCU

- If optional G4 or G3 interface kits are not installed -
[A]
1. Remove the rear cover.
2. Remove the FCU unit.
3. Remove the NCU assembly [A] (4 screws).
4. Remove the NCU [B] (4 screws) from the NCU assembly [A].
- When the optional G4 or G3 interface unit is also installed -
Refer to the FCU removal section.
SM
CÓPIA NÃO CONTROLADA
A895R502.WMF
[B]
6-7
CÓPIA NÃO CONTROLADA
NCU
A895R501.WMF
A265/A267