Error Messages During The Software Download - Gestetner A265 Service Manual

DOWNLOADING NEW SOFTWARE

4.2.2 ERROR MESSAGES DURING THE SOFTWARE DOWNLOAD

If downloading failed, one of the following error messages appears. At this time,
press the "CONFIRM" bottom in the display to re-try the download.
SYS Erasing Failed ADDR:XXXXXXXX
SYS Writing Failed ADDR:XXXXXXXX
SYS Verify Failed ADDR:XXXXXXXX
APL Erasing Failed ADDR:XXXXXXXX
APL Writing Failed ADDR:XXXXXXXX
APL Verify Failed ADDR:XXXXXXXX
NIC board is not equipped
NIC Initialization failed. CODE:XXXX
NIC Download mode is disable
NIC Writing Failed ADDR:XXXXXXXX
NIC Host Service Error CODE:XXXX
A265/A267
CÓPIA NÃO CONTROLADA
Message
CÓPIA NÃO CONTROLADA
Re-try the download. If the
download fails again, replace the
scanner controller.
Re-try the download. If the
download fails again, replace the
scanner controller.
Check whether the STP cable is
disconnected. If it is connected,
disconnect the cable and re-try the
downloading.
18-12
Action
SM